Updated Nov 19, 2026· 8 min read

Key takeaways

  • Compare the best smart water shutoff valves for whole-home leak protection, from inline flow monitors to clamp-on valve robots and hub-free picks.

A smart water shutoff valve closes the main water supply on its own when a leak is detected, so a burst pipe does not run for hours while the house is empty. The best options are the Moen Flo 900-001 for flow-based monitoring, the Phyn Plus 2nd Gen for pressure-wave detection, the YoLink controller for a no-plumber retrofit, the EcoNet Bulldog-JW for a Wi-Fi valve robot, and the Dome DMWV1 for a Z-Wave home.

A leak detector on its own only sends an alert, and an alert does no good if nobody is home to act on it. A shutoff valve finishes the job. The five products below cover the two main designs. Inline valves replace a section of the main water line and measure flow or pressure. Clamp-on actuators bolt over the lever handle of the ball valve already on the main line and turn it when a sensor trips.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

For most homes, the Moen Flo 900-001 is the best all-round smart water shutoff valve, because it monitors flow on the main line and shuts the water off on its own. Renters and DIY buyers should look at the YoLink controller or the Dome DMWV1, which clamp onto the existing valve with no pipe cutting. Homes with larger mains should compare the Phyn Plus 2nd Gen.

1. Moen Flo 900-001 Smart Water Shutoff, 3/4-Inch

Check price on Amazon

Best for: Whole-home flow monitoring with automatic shutoff

The Moen Flo 900-001 is an inline smart water monitor and shutoff that installs on the main water line. It measures water flow, learns normal usage patterns, and shuts the supply off automatically when it detects a flow pattern that looks like a leak. It connects over Wi-Fi and is controlled from the Moen Smart Water Network app, where the main line can be turned on or off remotely. It is a professionally installed product in most homes, because the main line has to be cut to fit the valve body inline. Paired Smart Water Detectors can trigger a shutoff from a puddle under a sink.

Spec Detail
Brand Moen
Model 900-001
Pipe size 3/4 inch
Detection Flow monitoring
Connectivity Wi-Fi, app control
Voice control Alexa
Installation Inline, plumber recommended
ASIN B00C03D01Q

2. Phyn Plus Smart Water Assistant + Shutoff, 2nd Gen

Best for: Pressure-wave leak detection in larger homes

The Phyn Plus 2nd Gen is an inline whole-home monitor with a built-in shutoff valve. It uses high-definition pressure wave analysis, sampling pressure 240 times per second, together with an ultrasonic flow sensor built with Badger Meter. After fingerprinting fixtures, it warns first, then shuts off immediately for a catastrophic flow anomaly.

It installs directly into the main water line and is a professionally installed product. It supports pipes up to 1.25 inches, which suits larger homes. Full functionality, including the analytics, needs no subscription. It has no battery backup, so it cannot shut the water off during a power outage, although the valve stays open by default.

Spec Detail
Brand Phyn
Model PHYPF011, 2nd Gen
Pipe size Up to 1.25 inch
Detection Pressure wave analysis, 240 readings per second
Flow sensor Ultrasonic, Badger Meter
Connections 1-inch NPSM threaded
Voice control Alexa, Google Assistant
Installation Inline, professional install
ASIN B081J4BMDY

3. YoLink Smart Water Valve Controller with Bulldog Valve Robot

Best for: A no-plumber retrofit on an existing ball valve

The YoLink Smart Water Valve Controller is a clamp-on actuator, not an inline valve. It mounts over the lever handle of the ball valve already on the main water line and turns the handle when a leak is detected or when the owner sends a command. No pipe cutting and no plumber are needed. It pairs with YoLink leak sensors, so a sensor under a sink can trigger a shutoff directly.

The controller uses LoRa wireless with a quarter-mile range, so it keeps working in basements where Wi-Fi is weak. A YoLink Hub is required for full remote and app functionality. It runs on four AA batteries, included, and the part number is YS-4909-03.

Spec Detail
Brand YoLink
Model YS-4909-03
Design Clamp-on actuator over existing lever ball valve
Wireless LoRa, quarter-mile range
Hub YoLink Hub required
Voice control Alexa, Google Assistant, IFTTT
Power 4 AA batteries, included
Installation No plumbing, DIY
ASIN B098W3VYWY

4. EcoNet Controls Bulldog-JW WiFi Valve Robot, EVC300-HCLXL-SK3

Best for: A Wi-Fi valve robot with a room-sensor kit

The EcoNet Bulldog-JW is a motorized valve robot that mounts over an existing lever-operated ball valve and turns it automatically when a compatible leak sensor detects moisture. It connects directly to Wi-Fi, so no hub is needed, and the app control is optional. The kit includes three leak sensors and supports up to 20, so one valve can protect several rooms at once.

The Bulldog-JW fits levered ball valves from 1/2 inch through 1-1/2 inches, which covers most residential main lines. Before ordering, check the listing: the same ASIN also appears attached to the newer EVC400-MW-SK3 kit in some retailer listings, so match the ASIN with the EVC300-HCLXL-SK3 model name.

Spec Detail
Brand EcoNet Controls
Model EVC300-HCLXL-SK3
Design Clamp-on valve robot over existing lever ball valve
Valve sizes 1/2, 3/4, 1, 1.25, 1.5 inch
Sensors 3 included, supports up to 20
Connectivity Wi-Fi, no hub needed
Power 12V DC, 1-amp adapter
Installation No plumbing, DIY
ASIN B08N5H9M9W

5. Dome Home Automation Water Shut-Off Valve, DMWV1

Best for: Z-Wave smart homes that already have a hub

The Dome DMWV1 is a Z-Wave Plus valve actuator that fits over the quarter-turn ball valve already on the main water line. It turns the valve open or closed on command from a connected smart home hub, and shuts the water off automatically when a paired Z-Wave water sensor detects a leak.

The DMWV1 fits ball valves up to 1-1/2 inches and needs no pipe cutting. It does not detect leaks or monitor water usage by itself, so it needs separate leak sensors and a Z-Wave hub, such as SmartThings or Wink, to work at all. It has no direct Alexa or Google Home connection.

Spec Detail
Brand Dome Home Automation
Model DMWV1
Design Clamp-on actuator over existing quarter-turn ball valve
Valve sizes Up to 1-1/2 inch
Connectivity Z-Wave Plus
Hub Z-Wave hub required
Extra Acts as a Z-Wave range extender
Installation No plumbing, DIY
ASIN B01LX3JFR8

How to Choose

Start with the pipe. Measure the main water line where the valve will go, and match the pipe size before anything else. The Moen Flo 900-001 fits 3/4-inch pipe, and the 1-inch version is a separate listing, model 900-006. The Phyn Plus supports pipes up to 1.25 inches. The clamp-on actuators are more forgiving: the EcoNet Bulldog-JW fits levered ball valves from 1/2 inch through 1-1/2 inches, and the Dome DMWV1 fits quarter-turn ball valves up to 1-1/2 inches. A clamp-on actuator only works on a lever-style ball valve.

Next, decide how the valve should detect a leak. Inline monitors watch the water itself: Moen Flo reads flow, and Phyn Plus reads pressure waves 240 times per second, so both can catch a hidden leak inside a wall. Clamp-on actuators rely on floor sensors placed where water pools, so they need sensors in the right rooms.

Then check the smart home requirements. The Moen Flo and the EcoNet Bulldog-JW connect over Wi-Fi with no hub. The YoLink controller needs a YoLink Hub, and its LoRa radio suits a basement with weak Wi-Fi. The Dome DMWV1 needs a Z-Wave hub and separate leak sensors. The Phyn Plus needs a power outlet near the main line and has no battery backup.

Finally, weigh installation. Inline valves need the main line cut, which means a plumber in most homes. Clamp-on actuators need no plumbing at all, which makes them the right choice for renters.

Who Should Skip

Skip a whole-home shutoff valve if the home has no accessible main shutoff valve and no clear place to mount the device. Clamp-on actuators need a lever ball valve with room around the handle.

Skip the inline models if the budget does not stretch to a plumber visit. The Moen Flo and the Phyn Plus both need the main line cut, and that work is not a DIY job in most homes.

Skip the hub-dependent models if the home has no hub and no plan to add one. The Dome DMWV1 does nothing without a Z-Wave hub, and the YoLink controller needs a YoLink Hub for remote control.

Skip an automatic shutoff entirely if the home runs equipment that must never lose water without warning, such as a boiler that needs a constant feed. In that case, a leak detector with alerts and no automatic shutoff is the safer choice.

Frequently Asked Questions

Does a smart water shutoff valve replace leak detectors?

No. A shutoff valve and leak detectors do different jobs, and most setups use both. The valve stops the water, and the detectors tell it where the water is. Inline monitors can detect a hidden leak on their own.

Can I install a smart water shutoff valve myself?

Clamp-on actuators such as the YoLink controller, the EcoNet Bulldog-JW, and the Dome DMWV1 bolt over the existing valve handle with no pipe cutting. Inline valves such as the Moen Flo and the Phyn Plus need the main line cut, so a plumber is the usual choice.

Will the valve shut off the water during a power outage?

It depends on the model. The Phyn Plus has no battery backup, so it cannot shut the water off during an outage, although its valve stays open by default. The YoLink controller runs on AA batteries.

Do I need a hub for a smart water shutoff valve?

Not always. The Moen Flo and the EcoNet Bulldog-JW connect over Wi-Fi with no hub. The YoLink controller needs a YoLink Hub, and the Dome DMWV1 needs a Z-Wave hub such as SmartThings or Wink.

Final Verdict

The best smart water shutoff valve for most homes is the Moen Flo 900-001, because it watches flow on the main line, shuts the water off on its own, and needs no hub. The Phyn Plus 2nd Gen is the pick for larger homes, with pressure-wave analysis. The YoLink controller is the best retrofit for renters, because it clamps onto the existing valve with no plumbing. The EcoNet Bulldog-JW is the best Wi-Fi valve robot with a sensor kit, and the Dome DMWV1 suits homes that already run a Z-Wave hub.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Smart Water Shutoff Valves: 5 Picks for…Check price on Amazon